Product Search

    SEARCH NOW FOR ALL YOUR ENCO MFG SOLUTIONS

    Radwell is here to supply you with all your plant floor needs.

    Radwell is not an authorised distributor, reseller or representative of the products featured on this website. All product names, trademarks, brands and logos used on this site are the property of their respective owners. The depiction, description or sale of products featuring these names, trademarks, brands and logos is for identification purposes only and is not intended to indicate any affiliation with or authorisation by any rights holder.

    Rockwell Disclaimer: The product is used surplus. Radwell is not an authorised surplus dealer or affiliate for the Manufacturer of this product. The product may have older date codes or be an older series than that available direct from the factory or authorised dealers. Because Radwell is not an authorised distributor of this product, the Original Manufacturer’s warranty does not apply. While many Allen-Bradley PLC products will have firmware already installed, Radwell makes no representation as to whether a PLC product will or will not have firmware and, if it does have firmware, whether the firmware is the revision level that you need for your application. Radwell also makes no representations as to your ability or right to download or otherwise obtain firmware for the product from Rockwell, its distributors, or any other source. Radwell also makes no representations as to your right to install any such firmware on the product. Radwell will not obtain or supply firmware on your behalf. It is your obligation to comply with the terms of any End-User License Agreement or similar document related to obtaining or installing firmware.

    Filter Results
    Results 1-50 of 165.
    ENCO MFG C-16G

    ENCO MFG

    C-16G

    DISCONTINUED BY MANUFACTURER, RELAY OFF OF AN ENCO LATHE
    Buy Surplus As Low As £203.76 Price with VAT: £244.51
    £203.76 Price with VAT: £244.51
    Repair Yours £200.00 Price with VAT: £240.00
    ENCO MFG 77084

    ENCO MFG

    77084

    DISCONTINUED BY MANUFACTURER, LIMIT SWITCH ROLLER ARM, 10AMP, 125-250V DC/AC, 1/4HP
    ✓ IN STOCK!
    Buy Surplus As Low As £10.48 Price with VAT: £12.57
    £10.48 Price with VAT: £12.57
    ENCO MFG AXM1N-18

    ENCO MFG

    AXM1N-18

    VACUUM PUMP, M SERIES
    ✓ IN STOCK!
    £59.33 Price with VAT: £71.19 Buy Surplus As Low As £25.95 Price with VAT: £31.14
    £25.95 Price with VAT: £31.14
    ENCO MFG 625-0938

    ENCO MFG

    625-0938

    CLAMP DIAL INDICATOR ASSEMBLY
    ✓ IN STOCK!
    £19.22 Price with VAT: £23.07 Buy Surplus As Low As £9.25 Price with VAT: £11.10
    £9.25 Price with VAT: £11.10
    ENCO MFG 23

    ENCO MFG

    23

    BEARING
    £12.61 Price with VAT: £15.13 Buy Surplus As Low As £8.16 Price with VAT: £9.79
    £8.16 Price with VAT: £9.79
    ENCO MFG MX2000B

    ENCO MFG

    MX2000B

    MAGNET MAG-MATE RARE EARTH
    £14.83 Price with VAT: £17.80 Buy Surplus As Low As £8.90 Price with VAT: £10.68
    £8.90 Price with VAT: £10.68
    ENCO MFG 10X51XSDS6-2V

    ENCO MFG

    10X51XSDS6-2V

    DRO SYSTEMS; MACHINE COMPATIBILITY: LATHE ; CALCULATOR FUNCTION: YES ; PROGRAMMABLE MEMORY: YES ; TOOL OFFSETS: 200 ; SCALE TYPE: GLASS; LINEAR SCALE ; ACCURACY (MICROMETER): 18M FOR X AXIS; ...
    £949.97 Price with VAT: £1,139.96 Buy Surplus As Low As £570.28 Price with VAT: £684.33
    £570.28 Price with VAT: £684.33
    ENCO MFG 130-5100

    ENCO MFG

    130-5100

    METAL NOTCHER 3/4" STROKE, 4 TON LOAD CAPACITY, 12" TABLE WIDTH X 18" TABLE DEPTH (MOQ=1, PKG QTY=1)
    £652.59 Price with VAT: £783.11 Buy Surplus As Low As £391.56 Price with VAT: £469.87
    £391.56 Price with VAT: £469.87
    ENCO MFG 130-5101

    ENCO MFG

    130-5101

    METAL FORMING/NOTCHER, METAL CUTTING & FORMING MACHINE STANDS
    £496.12 Price with VAT: £595.34 Buy Surplus As Low As £298.12 Price with VAT: £357.74
    £298.12 Price with VAT: £357.74
    ENCO MFG 130-5788

    ENCO MFG

    130-5788

    BENCH SHEARS; MACHINE STYLE: PLATE ; BLADE LENGTH INCH): 8 ; BLADE LENGTH: 8IN ; UNSPSC CODE: 23241500, (MOQ=1, PKG QTY=1)
    £159.44 Price with VAT: £191.33 Buy Surplus As Low As £95.66 Price with VAT: £114.80
    £95.66 Price with VAT: £114.80
    ENCO MFG 163-6089

    ENCO MFG

    163-6089

    BELT SANDING MACHINE: 89" LONG, 6" WIDE 2 HP, 110 & 220V, 3,900 FT/MIN BELT SPEED (MOQ=1, PKG QTY=1)
    £1,538.78 Price with VAT: £1,846.54 Buy Surplus As Low As £923.27 Price with VAT: £1,107.92
    £923.27 Price with VAT: £1,107.92
    ENCO MFG 1880ZX

    ENCO MFG

    1880ZX

    18" X 80" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 25 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £30,315.91 Price with VAT: £36,379.10 Buy Surplus As Low As £18,189.55 Price with VAT: £21,827.46
    £18,189.55 Price with VAT: £21,827.46
    ENCO MFG 1PH2AXISBDS

    ENCO MFG

    1PH2AXISBDS

    MILL DRILL MACHINE: 16-15/16" X 6-1/4" TRAVEL 115V, STEP PULLEY HEAD, 1 PHASE, 1.5 HP (MOQ=1, PKG QTY=1)
    £6,485.14 Price with VAT: £7,782.17 Buy Surplus As Low As £3,891.09 Price with VAT: £4,669.30
    £3,891.09 Price with VAT: £4,669.30
    ENCO MFG 1PHPWDWNFD2BDS

    ENCO MFG

    1PHPWDWNFD2BDS

    MILL DRILL MACHINE: 16-15/16" X 6-1/4" TRAVEL 115V, STEP PULLEY HEAD, 1 PHASE, 1.5 HP (MOQ=1, PKG QTY=1)
    £7,691.70 Price with VAT: £9,230.04 Buy Surplus As Low As £4,615.61 Price with VAT: £5,538.74
    £4,615.61 Price with VAT: £5,538.74
    ENCO MFG 30886300

    ENCO MFG

    30886300

    CHIP PAN FOR MSC # 50129584 MILLING MACHINE (MOQ=1, PKG QTY=1)
    £362.63 Price with VAT: £435.16 Buy Surplus As Low As £218.03 Price with VAT: £261.63
    £218.03 Price with VAT: £261.63
    ENCO MFG 3710033IN1/760

    ENCO MFG

    3710033IN1/760

    COMBINATION ROLLER, SHEAR & BRAKE MACHINES; MAXIMUM MILD STEEL SHEARING CAPACITY (GAUGE): 20 GA; MAXIMUM MILD STEEL BENDING CAPACITY (GAUGE): 20; MAXIMUM MILD STEEL ROLLING CAPACITY: 20 GA; ...
    £1,557.32 Price with VAT: £1,868.79 Buy Surplus As Low As £934.39 Price with VAT: £1,121.27
    £934.39 Price with VAT: £1,121.27
    ENCO MFG 373150

    ENCO MFG

    373150

    40" BENDING LENGTH FLOOR PRESS BRAKE 12 GA IN MILD STEEL (MOQ=1, PKG QTY=1)
    £4,431.70 Price with VAT: £5,318.04 Buy Surplus As Low As £2,659.32 Price with VAT: £3,191.18
    £2,659.32 Price with VAT: £3,191.18
    ENCO MFG 374902RS24A

    ENCO MFG

    374902RS24A

    METAL CUTTING & FORMING MACHINE STANDS; FOR USE WITH: SLIP ROLLS ; UNSPSC CODE: 23153100, (MOQ=1, PKG QTY=1)
    £377.47 Price with VAT: £452.96 Buy Surplus As Low As £226.92 Price with VAT: £272.31
    £226.92 Price with VAT: £272.31
    ENCO MFG 374903RS36A

    ENCO MFG

    374903RS36A

    METAL CUTTING & FORMING MACHINE STANDS; FOR USE WITH: SLIP ROLLS ; UNSPSC CODE: 23153100, (MOQ=1, PKG QTY=1)
    £439.02 Price with VAT: £526.82 Buy Surplus As Low As £264.00 Price with VAT: £316.80
    £264.00 Price with VAT: £316.80
    ENCO MFG 4X18XSDS6-2V

    ENCO MFG

    4X18XSDS6-2V

    DRO SYSTEMS; MACHINE COMPATIBILITY: LATHE ; CALCULATOR FUNCTION: YES ; PROGRAMMABLE MEMORY: YES ; TOOL OFFSETS: 200 ; SCALE TYPE: GLASS; LINEAR SCALE ; ACCURACY (MICROMETER): 18M FOR X AXIS; ...
    £860.24 Price with VAT: £1,032.28 Buy Surplus As Low As £516.14 Price with VAT: £619.37
    £516.14 Price with VAT: £619.37
    ENCO MFG 5C-MEASURE-A/B

    ENCO MFG

    5C-MEASURE-A/B

    COLLET CLOSERS; ACTUATOR TYPE: LEVER ; SPINDLE TYPE: D1-4 ; PSC CODE: 5136 (MOQ=1, PKG QTY=1)
    £1,254.76 Price with VAT: £1,505.71 Buy Surplus As Low As £753.45 Price with VAT: £904.14
    £753.45 Price with VAT: £904.14
    ENCO MFG 8X40XSDS6-2V

    ENCO MFG

    8X40XSDS6-2V

    DRO SYSTEMS; MACHINE COMPATIBILITY: LATHE ; CALCULATOR FUNCTION: YES ; PROGRAMMABLE MEMORY: YES ; TOOL OFFSETS: 200 ; SCALE TYPE: GLASS; LINEAR SCALE ; ACCURACY (MICROMETER): 18M FOR X AXIS; ...
    £921.05 Price with VAT: £1,105.26 Buy Surplus As Low As £553.22 Price with VAT: £663.87
    £553.22 Price with VAT: £663.87
    ENCO MFG 942-PH3-E

    ENCO MFG

    942-PH3-E

    9 X 42" 3 HP 220V STEP PULLEY CONTROL 3 PHASE KNEE MILLING MACHINE 26" LONG TRAVEL, 12" CROSS TRAVEL, 15.3" KNEE TRAVEL, 80 TO 5440 RPM, R8, 16 SPEEDS (MOQ=1, PKG QTY=1)
    £13,591.73 Price with VAT: £16,310.08 Buy Surplus As Low As £8,155.19 Price with VAT: £9,786.23
    £8,155.19 Price with VAT: £9,786.23
    ENCO MFG DS-B

    ENCO MFG

    DS-B

    12" DIAM, 1,700 RPM, SINGLE PHASE DISC SANDING MACHINES 16-3/8" LONG TABLE X 6-7/8" TABLE WIDTH, 16" OVERALL LENGTH X 15.7" OVERALL HEIGHT (MOQ=1, PKG QTY=1)
    £787.56 Price with VAT: £945.07 Buy Surplus As Low As £473.13 Price with VAT: £567.76
    £473.13 Price with VAT: £567.76
    ENCO MFG GH-1340A

    ENCO MFG

    GH-1340A

    ENGINE LATHE: SINGLE PHASE, 220V, 2 HP, GEARED HEAD 40MM BETWEEN CENTERS, 13MM SWING, 1.5000MM SPINDLE BORE (MOQ=1, PKG QTY=1)
    £8,432.54 Price with VAT: £10,119.05 Buy Surplus As Low As £5,059.82 Price with VAT: £6,071.78
    £5,059.82 Price with VAT: £6,071.78
    ENCO MFG GH-1440A

    ENCO MFG

    GH-1440A

    ENGINE LATHE: THREE PHASE, 220V, 2 & 3 HP, GEARED HEAD 40MM BETWEEN CENTERS, 14MM SWING, 1.5000MM SPINDLE BORE (MOQ=1, PKG QTY=1)
    £11,877.19 Price with VAT: £14,252.63 Buy Surplus As Low As £7,126.61 Price with VAT: £8,551.94
    £7,126.61 Price with VAT: £8,551.94
    ENCO MFG GS-B

    ENCO MFG

    GS-B

    PEDESTAL STAND :29.5" OAL (MOQ=1, PKG QTY=1)
    £181.69 Price with VAT: £218.03 Buy Surplus As Low As £109.01 Price with VAT: £130.82
    £109.01 Price with VAT: £130.82
    ENCO MFG RF-19V

    ENCO MFG

    RF-19V

    FLOOR DRILL PRESS: 20" SWING, 1 HP, 115 V, 1 PHASE 0 TO 1,485 RPM, 3MT & 3MT, 4.7244" SPINDLE TRAVEL LENGTH (MOQ=1, PKG QTY=1)
    £4,931.53 Price with VAT: £5,917.83 Buy Surplus As Low As £2,958.92 Price with VAT: £3,550.70
    £2,958.92 Price with VAT: £3,550.70
    ENCO MFG TDS-200BG LS

    ENCO MFG

    TDS-200BG LS

    BUFFER: 8" WHEEL DIA, 120V, 1 PHASE 5/8" ARBOR HOLE, 3,450 MAX RPM (MOQ=1, PKG QTY=1)
    £661.49 Price with VAT: £793.79 Buy Surplus As Low As £397.49 Price with VAT: £476.99
    £397.49 Price with VAT: £476.99
    ENCO MFG TDS-200CL

    ENCO MFG

    TDS-200CL

    BENCH GRINDER: 8" WHEEL DIA, 5/8" ARBOR HOLE DIA 120 V, 1 PHASE, 3,450 MAX RPM (MOQ=1, PKG QTY=1)
    £248.43 Price with VAT: £298.12 Buy Surplus As Low As £149.06 Price with VAT: £178.87
    £149.06 Price with VAT: £178.87
    ENCO MFG TDS-250BG LS

    ENCO MFG

    TDS-250BG LS

    BUFFER: 10" WHEEL DIA, 1 HP, 120V, 1 PHASE 3/4" ARBOR HOLE, 3,450 MAX RPM (MOQ=1, PKG QTY=1)
    £660.01 Price with VAT: £792.01 Buy Surplus As Low As £396.01 Price with VAT: £475.21
    £396.01 Price with VAT: £475.21
    ENCO MFG TG-6L

    ENCO MFG

    TG-6L

    CARBIDE GRINDER: 6" WHEEL DIA, 120V, 1 PHASE 1-1/4" ARBOR HOLE, 3,450 MAX RPM (MOQ=1, PKG QTY=1)
    £928.46 Price with VAT: £1,114.15 Buy Surplus As Low As £557.67 Price with VAT: £669.20
    £557.67 Price with VAT: £669.20
    ENCO MFG 00624072

    ENCO MFG

    00624072

    FLOOR DRILL PRESS: 38-1/2" SWING, 1.5 HP, 220V, 1 PHASE 5 SPEED, 21-5/8" TABLE LENGTH, 19-11/16" TABLE WIDTH (MOQ=1, PKG QTY=1)
    £4,666.78 Price with VAT: £5,600.14 Buy Surplus As Low As £2,800.22 Price with VAT: £3,360.26
    £2,800.22 Price with VAT: £3,360.26
    ENCO MFG 00919522

    ENCO MFG

    00919522

    HORIZONTAL BANDSAW: 9 X 16" RECTANGULAR, 9" ROUND CAPACITY, STEP PULLEY DRIVE 220V, 1 HP, 1 PHASE (MOQ=1, PKG QTY=1)
    £4,943.39 Price with VAT: £5,932.07 Buy Surplus As Low As £2,966.33 Price with VAT: £3,559.60
    £2,966.33 Price with VAT: £3,559.60
    ENCO MFG 10X40XSDS6-2V

    ENCO MFG

    10X40XSDS6-2V

    DRO SYSTEMS; MACHINE COMPATIBILITY: LATHE ; CALCULATOR FUNCTION: YES ; PROGRAMMABLE MEMORY: YES ; TOOL OFFSETS: 200 ; SCALE TYPE: GLASS; LINEAR SCALE ; ACCURACY (MICROMETER): 18M FOR X AXIS; ...
    £921.05 Price with VAT: £1,105.26 Buy Surplus As Low As £553.22 Price with VAT: £663.87
    £553.22 Price with VAT: £663.87
    ENCO MFG 10X62XSDS6-2V

    ENCO MFG

    10X62XSDS6-2V

    DRO SYSTEMS; MACHINE COMPATIBILITY: LATHE ; CALCULATOR FUNCTION: YES ; PROGRAMMABLE MEMORY: YES ; TOOL OFFSETS: 200 ; SCALE TYPE: GLASS; LINEAR SCALE ; ACCURACY (MICROMETER): 18M FOR X AXIS; ...
    £1,277.01 Price with VAT: £1,532.41 Buy Surplus As Low As £766.80 Price with VAT: £920.16
    £766.80 Price with VAT: £920.16
    ENCO MFG 1236STAND

    ENCO MFG

    1236STAND

    12" X 36" BENCH LATHE: GEARED HEAD, 110/220 V 1 PHASE, 1-1/2" SPINDLE BORE DIA, 65 TO 1,810 RPM (MOQ=1, PKG QTY=1)
    £5,679.04 Price with VAT: £6,814.85 Buy Surplus As Low As £3,407.57 Price with VAT: £4,089.09
    £3,407.57 Price with VAT: £4,089.09
    ENCO MFG 135-1551

    ENCO MFG

    135-1551

    VERTICAL BANDSAW: VARIABLE SPEED PULLEY DRIVE 220V, 1 HP (MOQ=1, PKG QTY=1)
    £5,811.04 Price with VAT: £6,973.25 Buy Surplus As Low As £3,486.92 Price with VAT: £4,184.31
    £3,486.92 Price with VAT: £4,184.31
    ENCO MFG 150-3025

    ENCO MFG

    150-3025

    110 VOLT PORTABLE DUST COLLECTOR 4" CONNECTION DIAM, 750 CFM AIR FLOW (MOQ=1, PKG QTY=1)
    £522.07 Price with VAT: £626.49 Buy Surplus As Low As £313.69 Price with VAT: £376.43
    £313.69 Price with VAT: £376.43
    ENCO MFG 163-4831

    ENCO MFG

    163-4831

    30" X 1" BELT SANDING MACHINE :1 PHASE, 115 V (MOQ=1, PKG QTY=1)
    £285.51 Price with VAT: £342.61 Buy Surplus As Low As £171.31 Price with VAT: £205.57
    £171.31 Price with VAT: £205.57
    ENCO MFG 1660ZX

    ENCO MFG

    1660ZX

    16" X 60" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 25 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £32,529.54 Price with VAT: £39,035.45 Buy Surplus As Low As £19,517.72 Price with VAT: £23,421.27
    £19,517.72 Price with VAT: £23,421.27
    ENCO MFG 751-IMT

    ENCO MFG

    751-IMT

    LATHE TOOL LIVE CENTER
    Buy Surplus As Low As £66.74 Price with VAT: £80.09
    £66.74 Price with VAT: £80.09
    ENCO MFG 2X50YDS-4006-AR

    ENCO MFG

    2X50YDS-4006-AR

    SHOP ROLL 2INX50YD ALUMINUM OXIDE CLOTH BACKING
    £43.75 Price with VAT: £52.50 Buy Surplus As Low As £22.25 Price with VAT: £26.70
    £22.25 Price with VAT: £26.70
    ENCO MFG 00458299

    ENCO MFG

    00458299

    56 INCH LONG X 17 INCH WIDE/DEEP X 24 INCH HIGH, METAL CUTTING AND FORMING MACHINE STAND FOR USE WITH SLIP ROLLS (MOQ=1, PKG QTY=1)
    £597.72 Price with VAT: £717.26 Buy Surplus As Low As £358.93 Price with VAT: £430.71
    £358.93 Price with VAT: £430.71
    ENCO MFG 105-1146

    ENCO MFG

    105-1146

    ENCO MILL DRILL MACHINE: 21" 1 PHASE, 1.5 HP (MOQ=1, PKG QTY=1)
    £2,599.25 Price with VAT: £3,119.10 Buy Surplus As Low As £1,559.55 Price with VAT: £1,871.46
    £1,559.55 Price with VAT: £1,871.46
    ENCO MFG 1054-PH3-E

    ENCO MFG

    1054-PH3-E

    10 X 54" 3 HP 220V VARIABLE SPEED PULLEY CONTROL 3 PHASE KNEE MILLING MACHINE 36" LONG TRAVEL, 16" CROSS TRAVEL, 15" KNEE TRAVEL, 65 TO 4500 RPM, R8, VARIABLE SPEED (MOQ=1, PKG QTY=1)
    £18,077.57 Price with VAT: £21,693.08 Buy Surplus As Low As £10,847.13 Price with VAT: £13,016.56
    £10,847.13 Price with VAT: £13,016.56
    ENCO MFG 135-1545

    ENCO MFG

    135-1545

    VERTICAL BANDSAW: VARIABLE SPEED PULLEY DRIVE 220V, 1 HP (MOQ=1, PKG QTY=1)
    £5,138.43 Price with VAT: £6,166.11 Buy Surplus As Low As £3,083.50 Price with VAT: £3,700.20
    £3,083.50 Price with VAT: £3,700.20
    ENCO MFG 13X40 STAND

    ENCO MFG

    13X40 STAND

    LATHE STAND, CHIP PAN NOT INCLUDED WITH STAND COMPATIBLE WITH MSC# 54972559, THE 13X40 GAP BED LATHE (MOQ=1, PKG QTY=1)
    £445.69 Price with VAT: £534.83 Buy Surplus As Low As £267.71 Price with VAT: £321.25
    £267.71 Price with VAT: £321.25
    ENCO MFG 1440ZX

    ENCO MFG

    1440ZX

    14" X 40" ENGINE LATHE: GEARED HEAD, 230/460 V 3 PHASE, 3-1/8" SPINDLE BORE DIA, 42 TO 1,800 RPM (MOQ=1, PKG QTY=1)
    £32,563.65 Price with VAT: £39,076.38 Buy Surplus As Low As £19,538.49 Price with VAT: £23,446.18
    £19,538.49 Price with VAT: £23,446.18
    ENCO MFG 150-3027

    ENCO MFG

    150-3027

    REPLACEMENT BAG COMPATIBLE WITH 150-3025 (MOQ=1, PKG QTY=1)
    £35.60 Price with VAT: £42.72 Buy Surplus As Low As £21.51 Price with VAT: £25.81
    £21.51 Price with VAT: £25.81
    Next
    1 2 3 4